Aqua Comfort Vintage Classic Series Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aqua Comfort Vintage Classic Series. Aqua Comfort Vintage Classic Series 14 pagina's. Heat pump pool heaters

Pagina afdrukken

1. Troubleshooting Checklist

TEMPERATURE SCALE

With this setting you have the choice of the displayed temperature in Fahrenheit or Celsius.

Default setting is "F."

DEFROST SELECTION

With this setting you can select whether defrosting shall be done in with air flow or by energizing the

reversing valve. By pressing either up or down you can toggle between "AIR DEFROSTING" or

"REVERSE CYCLE". Default setting is "AIR DEFROSTING.".

WATER SENSOR CALIBRATION

With this setting you can calibrate the water temperature reading. The calibration range is +/- 10 degrees F

or +/- 5 degrees Celsius.

Default setting is "0".

EVAPORATOR SENSOR CALIBRATION

With this setting you can calibrate the evaporator temperature reading. The calibration range is+/- 10

degrees Fahrenheit or +/- 5 degrees Celsius. Default setting is "0".

ELECTRONIC CONTROL PANEL

LCD DISPLAY

Displays the actual pool/spa

temperature. In select mode

displays other parameters.

SELECT/SERVICE KEY

Used to select mode of

operation and enter service

mode.

NORMAL MODE

• When power is applied, the heater will turn on in the last mode in which it was used.

• User adjustable temperature range will be 50 to 95 degrees in Pool mode and 50 to 104

degrees in Spa mode.

POOL – HEAT

85◦

▼

MODE SELECTION

▲

INCREASE KEY

DECREASE KEY