AvLab DP SoundWave 5.1 PCIe Installatiehandleiding - Pagina 11
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AvLab DP SoundWave 5.1 PCIe. AvLab DP SoundWave 5.1 PCIe 12 pagina's.
Pagina afdrukkenHeadphone / S/PDIF Output Audio Selection
1.
Click Headphone or S/PDIF Out icon in the left
side bar of the main menu. Once S/PDIF Out is
selected, a green check will appear below the
Headphone or S/PDIF Out icon.
2.
Right click on it for more audio settings.
Mic In / Line- In / S/PDIF-In / Stereo Mix Input
Audio Selection
1.
Click Mic / Line- In / S/PDIF-In / Stereo Mix icon
in the left side bar of the main menu. Once it is
selected, a green check will appear.
2.
Right click on it to display the advanced audio
settings. See Table 3.
Function
Volume
Control
Sample Rate
Xear SingFX*
(For Mic-In
only)
FAQ
Q:
Why is there no audio output after the driver is
successfully installed?
A:
Please go to Control Panel, double click Sound or
Sound and Multimedia to check if the C-Media
High Definition Audio Device is selected as the default
audio output device.
If C-Media High Definition Audio Device is the default
audio output device, there will be a check beside
it.
Function Description
Adjust Mic-In / Line-In volume level for recording and
volume level for Mic-In/Line-In monitor.
Select one sample rate from 44.1 HKz, 48 KHz, 96KHz, and
select Bit Depth from 16 bits & 24 bits.
Click "Xear SingFX", and check the "Microphone Echo" box to
enable microphone echo effect; check the "Magic voice" box to
select from the preset magic voice modes.
Table 3
11