AvLab DP CyberParallel PCIe Snelle installatiehandleiding - Pagina 4

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} AvLab DP CyberParallel PCIe. AvLab DP CyberParallel PCIe 8 pagina's.

Pagina afdrukken
Windows Vista (32-bit)
1.
Install the board and boot up Windows.
2.
At the Found New Hardware window, click Locate
and install driver software (recommended), then
click Continue.
3.
Click I don't have the disk. Show me other options.
4.
Insert the driver CD. Click Browse my computer for
driver software.
5.
Type D:\XP-later\32-bit, then click Next. (Change
D: to match your CD/DVD-ROM drive letter)
6.
At The software for this device has been
successfully installed, click Close.
7.
Repeat steps 4-6 to complete the installation.
Windows Vista (64-bit)
1.
Install the board and boot up Windows.
2.
At the Found New Hardware window, insert the
driver CD, click Locate and install driver software
(recommended), then click Continue.
3.
Click Don't search online. Click Next.
4.
Click Close.
5.
Repeat steps 3-4 to complete the installation.
Windows XP (32-bit)
1.
Install the board and boot up Windows.
2.
At the Found New Hardware Wizard, select No, not
this time, click Next. (Skip this step if not prompted)
3.
Select Install from a list or specific location, then
click Next.
4.
Insert the driver CD. Select Include this location in
the search, uncheck the other box, type D:\XP-
later\32-bit, then click Next.
4