AAxeon Optolinx FCU-RACK16 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AAxeon Optolinx FCU-RACK16. AAxeon Optolinx FCU-RACK16 2 pagina's. 16 slots universal media converter rack

Pagina afdrukken

FCU-RACK16

16 Slots Universal

Media Converter Rack

User's Guide

Ver:1.4

aa eon

AAXEON TECHNOLOGIES, LLC

www.aaxeon.com

2.0 Installation

2.1 Rack Mounting

The

16 Slots Universal Media Converter Rack

mounted in a standard EIA 19-inch rack. Begin by

aligning the mounting brackets along the sides of the

unit with the slit over the holes. Secure the screws

tightly to fit the brackets to the device before fixing it

into the 19-inch rack. Please ensure that the

ventilation holes are not obstructed. The step by step

procedure is shown on the next page.

2.2 Media Converter

1. Screw upper & lower sliders on the media converter.

2. Carefully align the slider and slideway, then press

them with firm and steady pressure.

2.3 Cabling

1. The correct cable specifications and distances will

be listed in the media converter documentation.

2. Connect input media cable to the front of

( the now installed ) media converter.

2.4 Powering

1. Connect the female end of the power cord to the

MCR.

2. Connect the male end of the power cord to an

external AC outlet.

3. The power A, B LED's on the Rack will illuminate

on installation

4. Similarly, the power indicator LED's on the media

converter will illuminate when installation is

complete.

Trademarks

Contents subject to revision without prior notice.

All trademarks remain the property of their

respective owners

This publication may not be reproduced as a whole

or in part, in any way whatsoever unless prior

consent has been obtained from owner

FCC Warning

The 16 Slots Universal Media Converter Rack has been

tested and certified within Class A digital

specifications under Part 15 of FCC Rules. These

standards are designed to provide reasonable

protection from harmful interference when these units

are used in a commercial environment.

These devices can use, generate, radiate radio

frequency energy, and may cause harmful interference

to radio communications unless installed in accordance

with the instructions in this User's Guide.

Operation of this device in a residential area is likely

to cause harmful interference which will make the

user responsible for the appropriate remedial action

at his/her expense.

CE Mark Warning

The

16 Slots Universal Media Converter Rack

Class A product. In some domestic environments it

may cause radio interface in which case the user will

need to consider adequate preventative measures.

3.0 Specifications

Slot number

can be

16 slots

LED

Power A Activity

Power B Activity

Redundancy

2 Hot-swappable redundant Powers

Power

Slide-in Power Module:

Input AC 110V or 240V

Output DC 5V

Power Consumption:

Empty Loading: 9.5W

Typical Operation & Storage Temperature

Operation:0 ~ 50°C

Storage Temperature: -20° ~ 60°C

Humidity:5% ~ 90% non-condensing

Dimension and Weight

Size: 440 x 385 x 88 mm (WxDxH)

Shipping Weight:

16 Slots Media Converter Rack:8.5KG

Slide in AC Power Module:1.1KG

Emission/Safety:

EMI : FCC Class A, CE

* For further reports, please contact us for update.

1. Introduction

The Media Converter Rack,

Converter Rack is designed to accommodate sixteen

separate and independent media converters within a

rack-mountable rack.

The 16 Slots Universal Media Converter Rack is fitted

with two hot-swappable power supplies and three

hot-swappable fans for enhanced reliability. This

means that if one supply fails, the other is capable of

taking over immediately.

The other benefit is when there's power supply or fan

failure. The user simply replaces the failed unit with

another one without taking down the whole 16 Slots

Universal Media Converter Rack.

Power status is shown on the LED display enabling

the user to monitor and respond as necessary.

For optimum performance, please ensure that the

16 Slots Universal Media Converter Rack is seated in a

well-ventilated position, enabling air to circulate

above and below the unit

The 16 Slots Universal Media Converter Rack can also

be installed in a standard 19-inch site rack; provision

has been made for the appropriate connecting brackets.

The Media Converter Rack has been designed

to house only our proprietary range of media

converters. Any other configuration is at the

users own risk.

is a

Strongly Recommend:

To ensure the best performance of

standalone media converters, please

keep your environment temperature

under 40 degrees Celsius.

Or , install two power modules on your

16 Slots Universal Media Converter Rack

16 Slots Universal Media