Avlite AV-HL-FL Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Avlite AV-HL-FL. Avlite AV-HL-FL 2 pagina's.

Set the Light Group (PV Model Only)

or wire the Floodlight unit (DC and UM

Models Only)

AV-HL-FL-PV models: Determine to which group

each individual light belongs.

Set the light group by adjusting the Rotary Switch

A on the PCB to the appropriate light group (E.g. 0,

1, 2 etc).

AV-HL-FL-DC or UM Models: Wire the LED

Floodlight Unit into the daisy chain configuration via

the junction box. Follow the wiring instructions in

section 7.0 of the Installation Manual.

PV Model

DC and UM Models

Need more information?

Please see the AV-HL-FL Installation and Service Manual for full wiring installation at www.avlite.com.

Junction Box (UM or DC)

Note: Power and Data cables

can be wired into the junction

box from the left or right hand

Internal wiring to Light

Head Assembly

AUSTRALIA

+61 (0)3 5977 6128

Test and secure

AV-HL-FL-PV models: Test the operation of the light by

using the Radio Controller

Close the PCB enclosure and Solar Assembly. Secure

the lid with the provided bolt.

AV-HL-FL-DC and UM Models: Test the Operation of the

lighting circuits in the Helipad Lighting System using the

Primary Helipad Controller (AV-HL-CTRL-T1 or AV-HL-

CTRL-T2)

Bolt the light to its final location.

side

USA

+1 (603) 737 1310

www.avlite.com

Alwa

s On

Dusk till Dawn

AV-HL-FL_QSG_EN_V1-0