A.H. Systems PAM-0118P Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} A.H. Systems PAM-0118P. A.H. Systems PAM-0118P 13 pagina's.

A.H. Systems Model PAM-0118P Pre-Amplifier

GENERAL INFORMATION

SPECIFICATIONS

The PAM-0118P Pre-amplifier specifications:

The Model PAM-0118P preamplifier is supplied with an external regulated power

supply, that can be used on 110 – 120 Vac, 60 Hz or 220 – 240 Vac, 50 Hz, and

supplies +15 Vdc up to 1 A. The power supply has a standard AC input connector and

uses a 2.5mm coax output connector. The preamplifier has a low voltage indicator that

allows you to power the preamplifier with an external battery supply.

The following is a recommend accessory list for the Model PAM-0118P

preamplifier:

SAC-18G-0.5

0.5 meter high-frequency, low-loss cable to interconnect the preamplifier to the

receiver or analyzer. This high performance cable is made with the best

materials and precision N-type male connectors. Other connectors are

available and these cables can be made to your specified length.

SAC-18G-3

3 meter high-frequency, low-loss cable to interconnect the preamplifier to the

antenna or chamber wall. This high performance cable is made with the best

materials and precision N-type male connectors. Other connectors are

available and these cables can be made to your specified length.

Adapters

Need an adapter? We stock those as well.

 A.H. Systems inc. – May 2014

REV D

Power output .....................................+10 dBm at 1 dB compression

Frequency Range..................................................20 MHz – 18 GHz

Gain (typical).............................................................................38 dB

Gain (minimum)........................................................................35 dB

Gain Flatness ...................................................................+/- 2.75 dB

Noise Figure.....................................................................2.5 dB Max

Modulation Capability................................will reproduce AM, FM or

Primary Power........................................................+15 Vdc, 110 mA

RF Connectors...................................................................Type N (f)

Impedance............................................................50 W, < 2.5 VSWR

Weight ....................................................................................1.1 lbs.

Size (W x H x D)...................................................3.75" x 2.5" x 6.25"

pulse modulation on the

input signal