AVM OVATION PA8 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AVM OVATION PA8. AVM OVATION PA8 18 pagina's. Modular preamplifier

4. Menu system

The PA8 offers a lot of custom specific settings in their menu system. To enter the menu just tip on the

button MENU (7). The button now changes to EXIT. A second tip on this button leads you to the normal

operating mode. When the menu system is active you can select the desired function using the buttons

! ITEM" (5, 6). The setting is done using the buttons ! VALUE" (8, 9). Depending on the actual source

the menu system offers the following settings:

4.1 RDS-Display (tuner must be built in and selected as source)

Choose if station NAME, RDS-TEXT or FREQUENCY is displayed.

4.2 Scanmode (tuner must be built in and selected as source)

Set tuning mode between "auto" or "manual". (See also 3.5.1)

4.3 2-ch-Mode (tuner must be built in and selected as source)

Set tuner to mono or stereo to obtain best sound.

NOTE: Depending on actual setting the threshold for auto tuning will change (sensitive in MONO, less

sensitive in STEREO).

4.4 Bandwidth (tuner must be built in and selected as source)

Select bandwidth "narrow" / "wide" for best reception.

4.5 Sensitivity (tuner must be built in and selected as source)

Choose between "local" (in case the tuner operates from a cable) and "distant" (if operated from antenna)

4.6 Tone control (if sound processor is equipped)

Set tone control to "bypass" (= linear) or "active". In case the tone control is activated "TONE ON" is shown

in the display (4), otherwise "LINEAR".

You can choose if you want to change bass and treble settings simultaneously for all inputs ("global") or

especially for the actual input ("individual"). See 10.1.2

The loudness function depends on speakers and properties of the listening room and is therefore always

"global".

NOTE: In case tone control is set to "bypass" the menu will skip the bass, treble, and loudness settings (4.7 -

4.9).

Set tone control to "bypass" (= linear) or "active". In case the tone control is activated a "TONE ON" is shown

in the display (4).

4.7 Bass (if sound processor is built in)

Set bass level between – 5 and + 9.

4.8 Treble (if sound processor is built in)

Set treble level between – 7 and + 7.