Aqua Creek Products TIDAL WAVE F-TWPB-04 Handmatig - Pagina 4
Blader online of download pdf Handmatig voor {categorie_naam} Aqua Creek Products TIDAL WAVE F-TWPB-04. Aqua Creek Products TIDAL WAVE F-TWPB-04 14 pagina's.
3.
Once the legs are assembled to the
frame the bike can be stood upright. To
do this, fl ip the lever up at the main pivot
point of the bike, and fold the bike frame
out until the lever falls into the second slot.
out until the lever falls into the second slot.
See FIG. 3 to the right.
TOOLS REQUIRED
1/2" FLAT WRENCH
4.
To attach the adjustable handlebars
fi rst place the plastic sleeve in place on
the main frame. Then, set the adjustable
handlebars and adjustment bracket
assembly in place on top of the plastic
sleeve. Secure together with two (2)
5/16" x 2 1/4" hex head bolts and 5/16"
fl at washers.
See FIG. 4 to the right.
4
Copyright © 2018 Aqua Creek Products All Rights Reserved
Tidalwave Assembly Instructions
LATCH
(FLIP-UP)
DETAIL A
A
5/16" X 2 1/4"
HEX HEAD (2)
5/16" FLAT
WASHER (2)
ADJUSTMENT
BRACKET
ASSEMBLY
PLASTIC
SLEEVE
MAIN FRAME
FIGURE 3
ADJUSTABLE
HANDLEBARS
FIGURE 4
Revised 5/4/18