AvMap FarmNavigator Turtle Pro2 Installatiehandleiding - Pagina 5
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AvMap FarmNavigator Turtle Pro2. AvMap FarmNavigator Turtle Pro2 8 pagina's.
Ook voor AvMap FarmNavigator Turtle Pro2: Installatiehandleiding (5 pagina's)
Pagina afdrukken
4. How to use the receiver with third-party devices
The receiver can be used with any third-party device compatible with serial communication and
NMEA 0183 messaging (RS232 protocol).
4.1 Third-party devices connection scheme
To connect the receiver to a third-party device, simply connect your device to the DB9 connector
end of the power cable according to the Pin-Out presented below.
4.2 NMEA Baud rate
Farmnavigator GNSS receivers can output standard NMEA messages at different baud rates.
The default setting is at 115200 bps which is the most commonly used by third party displays.
For any other specific setup, please refer to your distributor/reseller or to www.farmnavigator.com.
6
1
9
5
PIN-OUT
PIN n°
Function
2
GPS TX
3
GPS RX
4
GPS VCC
5
GPS GND
Third-party
device
5