AB Quality 22-COMM-E Opmerkingen over productvrijgave - Pagina 5

Blader online of download pdf Opmerkingen over productvrijgave voor {categorie_naam} AB Quality 22-COMM-E. AB Quality 22-COMM-E 8 pagina's. Ethernet/ip adapter

Pagina afdrukken

Installing the Flash Kit

1. Install the flash kit utility from the Allen-Bradley Web Updates site for

the 22-COMM-E adapter. (This also automatically installs the latest

version of the ControlFLASH utility on your computer.)

2. You are now ready to use DriveExplorer, DriveExecutive or

ControlFLASH to update the adapter. Follow the instructions in the

appropriate section below.

Using DriveExplorer Lite/Full

1. With the Flash Kit installed (see

DriveExplorer and go online (via 1203-USB or 22-SCM-232 converter)

with the drive that is connected to the adapter.

2. In the DriveExplorer treeview, click on 22-COMM-E EtherNet/IP

Module. Then click the information icon as shown in

the adapter's properties screen.

3. On the 22-COMM-E properties screen, click the Details tab.

Important: This update may cause the adapter parameters to revert to

their default values. You may want to save your

configuration using DriveExplorer or the HIM CopyCat

feature before upgrading.

4. To start the flash update, click the Flash Update... button. Follow the

screen prompts until the flash update procedure completes and displays

the new firmware revision (v1.007).

Using DriveExecutive

1. With the Flash Kit installed (see

DriveExecutive and go online with the drive that is connected to the

adapter.

2. In the DriveExecutive treeview, click on 22-COMM-E. Then click the

information icon as shown in

screen.

3. On the 22-COMM-E Properties screen, click the Component Details tab.

Important: This update may cause the adapter parameters to revert to

their default values. You may want to save your

configuration using DriveExecutive or the HIM CopyCat

feature before upgrading.

4. To start the flash update, click the Flash Update button. Follow the

screen prompts until the flash update procedure completes and displays

the new firmware revision (v1.007).

22-COMM-E EtherNet/IP Adapter Firmware v1.007

Installing the Flash

Figure 2

to display the adapter's Properties

Kit), launch

Figure 1

to display

Kit), launch