Avocent DSR Series DSR8035 Opmerkingen over firmware-uitgave - Pagina 3

Blader online of download pdf Opmerkingen over firmware-uitgave voor {categorie_naam} Avocent DSR Series DSR8035. Avocent DSR Series DSR8035 3 pagina's. Avocent dsr series dsr2035: install guide
Ook voor Avocent DSR Series DSR8035: Release Release (3 pagina's), Opmerkingen over firmware-uitgave (3 pagina's), Opmerkingen over firmware-uitgave (3 pagina's), Release Release (3 pagina's), Release Release (1 pagina's), Snelle installatiehandleiding (16 pagina's)

6. Resolved issue where characters were dropped when typing extremely fast. The switch now

supports typing at up to 1800 characters per minute.

7. Resolved issue where portions of the DSR switch's Avocent-proprietary SNMP MIB were readable

via an SNMP walk utility. The entire Avocent-proprietary MIB is now only accessible via DSView 3

software.

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030

DSR2035, DSR8035

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSRxx30.fl

DSR8035.fl