deZem HarvyLR-36 Gebruikershandleiding en technische gegevens - Pagina 3

Blader online of download pdf Gebruikershandleiding en technische gegevens voor {categorie_naam} deZem HarvyLR-36. deZem HarvyLR-36 9 pagina's. Iot sensor

Pagina afdrukken
User manual IoT sensor HarvyLR

1 Introduction

Please read the following information carefully.
Keep the manual or pass it on to other users of the product. Visit our website www.dezem.de with the respective
website belonging to the product. There you may find further information about the product.
This product complies with the legal, national and European requirements. All company names and product designa-
tions contained herein are trademarks of their respective owners. All rights reserved.

2 Safety instructions

The device complies with electrical protection class III.
•
To maintain the protection class III, only external sensors/power sources which also comply with SELV
(safety extra-low voltage) requirements – protection class III – may be connected to the device.
•
Avoid shocks or impacts.
•
If the housing or cable is damaged, please contact deZem GmbH and do not install the affected device.
•
Do not connect deZem clamp-on current transformers to uninsulated or damaged cables.
•
The product must be installed professionally and in accordance with the specified installation guidelines.
•
Installation may only be carried out by appropriately qualified personnel.
•
For safety and approval reasons, unauthorised conversion and/or modification of the product is not per-
mitted.
•
Maintenance, adjustment or repair work may only be carried out by a specialist or a specialist workshop
that is familiar with the associated dangers and the relevant regulations.
•
Do not expose the product to extreme temperatures, direct sunlight or strong vibrations. Protect the prod-
uct from dust and dirt.
Page 3 of 9