DFC T730 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} DFC T730. DFC T730 13 pagina's.

Step 1 Installing the upright frame

Upright and secure the upright frame into the stabilizer with Hex Bolt M8x50mm teeth 12mm

(S2) and Hex Bolt M8x16mm(S3) back sides.

Important : While assembly, it need two person work together. One people hold the computer

and another one tighten the bolts with the Allen Wrench (S1) provided.

Step 2 Installing the Computer

Connect the Signal Wire from the computer to the Signal Wire from the upright frame first .

Then, secure the computer into the upright frame with two Hex Bolt M8x16mm (S3) back

sides. Tighten the bolts with the Allen Wrench (S1) provided.

Abutting Joint