AVOCOR AVC-SB1 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AVOCOR AVC-SB1. AVOCOR AVC-SB1 18 pagina's. With hdmi and bluetooth aptx

TROUBLE SHOOTING

If you encounter problems when using the AVC-SB1 Soundbar, check the following points

before requesting a service call.

In order to keep the warranty valid, please DO NOT attempt to repair the system yourself.

NOTE: DUE TO EEC REGULATIONS THIS SOUNDBAR WILL SWITCH TO STANDBY MODE AS FOLLOWS

The AVC-SB1 switches to standby mode in the following situation:



The device is idle for 30mins when powered by AC supply;



The L/R Audio in or 3.5mm jack is disconnected or when there is no input signal or the input

signal is too low.

If using the 3.5mm jack input to AVC-SB1, we recommend to default the output volume at 75%

or above on the external devices to ensure that it does not automatically go into standby

mode.

NO POWER

Make sure power cords are securely connected to the AC output.

Make sure that there is power at the AC output.

Press the power button on the remote control or the front of the AVC-SB1.

NO AUDIO

Press the Volume + (Up) button on the remote control or the front of the AVC-SB1.

Make sure that you selected correct input (Input 1, Input 2, or Input 3).

Press MUTE on the remote to make sure the AVC-SB1 Soundbar is not muted.

Make sure audio cables are securely connected at the terminals of the AVC-SB1 and

the external devices.

BUZZING OR HUMMING NOISE

Make sure audio cables are securely connected at the terminals of the AVC-SB1

Soundbar and the external devices.

Test on an alternate device or replace the audio cable.

Test the device and cable on an alternate input on the AVC-SB1 Soundbar.

THE REMOTE CONTROL IS NOT FUNCTIONING

Aim the remote control directly at the sensor on the front of the AVC-SB1 Soundbar.

Reduce the distance between the remote control and the AVC-SB1 Soundbar.

Make sure that the battery is inserted with its polarities (+/– signs) aligned as indicated.

Replace the battery.

THE SOUNDBAR AND REMOTE ARE NOT RESPONSIVE

Unplug the power cord from the AC output, and plug back in after a few seconds.

44[Type here]

[Type here]