Bilanciai EV7-S Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Bilanciai EV7-S. Bilanciai EV7-S 6 pagina's.

PC.ERR

NO ENAB

Contact the Assistance Service if any other error message appears.

Communication

error with the PC

During the

installation

phase, the

weighing

operation was

enabled via

serial link. The

weighing

operation cannot

therefore be

requested by

pressing

1-117

EV7 -S

Check the cable that connects

to the PC.

Make sure that the PC is on

and that the program has been

installed correctly.

Make sure that the port that

communicates with the PC

has been set up:

access the Setup Menu by

following pathway

Person/MPP/COPC and

select COM.1 (see par. 8.5.6

on page 1-101).

Do not press key

To request the weighing

operation by pressing key

, access the Setup Menu

by following the pathway

Person/MPP/RICH and

select TASTO (see par. 8.5.6

on page 1-101).