Avonic CM-CON100 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avonic CM-CON100. Avonic CM-CON100 13 pagina's. Ptz camera controller
Ook voor Avonic CM-CON100: Gebruikershandleiding (12 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (11 pagina's), Gebruikershandleiding (16 pagina's)

Addressing Multiple Cameras

In case more cameras are connected to the controller, each camera needs to be addressed the right

way to a camera number of the controller.

The following settings need to match in both camera and controller:

1. Protocol (VISCA, PELCO-p or PELCO-d)

2. Camera address number (1, 2 or n)

3. Communication settings as baud rate (9600), parity, etc.

See the Operation Instruction in the manuals of the cameras for more detail. The following section of

this manual describes how to set up the controller.