Avonic CM-CON100 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avonic CM-CON100. Avonic CM-CON100 16 pagina's. Ptz camera controller
Ook voor Avonic CM-CON100: Gebruikershandleiding (12 pagina's), Gebruikershandleiding (10 pagina's), Gebruikershandleiding (13 pagina's), Gebruikershandleiding (11 pagina's)

3. Volume Setting

Volume Setting

Move the joystick up to increase and down to decrease the volume (0 - 6), or set it OFF. Press

to save the volume.

Backlight Setting

The backlight setting will lighten the buttons of the CON100 to help to see the buttons in dark area's. Move the

joystick up and down to change the backlight mode (AUTO, ON, OFF) and press

Sleep Setting

The sleep setting will set the time before the CON100 will fall asleep.

Move the joystick up and down to change the time (Off, 30 seconds, 1 minute, 5 minutes, 10 minutes, 30

and 60 minutes).

Press

to save the time.

Press a (random) button or move the joystick to make the CON100 active again

6. PIN Setting (and what to do if the PIN is lost)

PIN Setting

This will set the PIN. Move the joystick up and down to change between the USER or the ADMIN

(administrator). Press

number buttons and press ENT to confirm. Enter now the new PIN and confirm this by pressing the ENT button.

For the initial PIN see page 10.

If the PIN has been changed and is lost, use the following mastercode to regain access to the

CON-100: 7 7 8 8 9 6

Note: In non-setup menu status, quickly lock function can be realized by simply pressing SHIFT + ENT . "USER

PIN"or "ADMIN PIN" is required for operating the controller again.

www.avonic.com

0 - 6

OFF

AUTO

OFF

30 seconds

1 / 5 / 10 / 30 / 60 Minutes

USER

ADMIN

to save. The controller now asks for the old PIN. Type the old PIN by using the

to save the setting.