Avonic AV-CD500 Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avonic AV-CD500. Avonic AV-CD500 20 pagina's.
Ook voor Avonic AV-CD500: Gebruikershandleiding (19 pagina's)

Pagina afdrukken

Mounting and Installation

To use the CD500 you need two AV-CM70-IP camera's. These camera's can be mounted to a wall or tripod.

This chapter describes the steps you have to perform to mount and install the cameras in a correct and safe

manner.

These steps are subdivided into the following groups, each of which is described in a separate section:

1. Mounting on a Wall

2. Connecting the Components to the CD500 and the cameras

Take the following precautions to prevent the CD500 and its cameras from falling down which may

cause injuries:

• Set up the Product on a hard, stable surface, or mount it to a wall or ceiling.

• ONLY use an Avonic mount for mounting to a wall or tripod.

• Ensure the mounting construction is capable of supporting four times the weight of the cameras

and/or the Product. (See 'General Specifications > Weight product' in the CD500 and/or CM70-IP

Datasheet for the exact weight.)

• Use a safety loop or drop protection that prevents the Product from falling if the mounting

construction fails.

• During mounting and installation, NEVER install the Product above a person.

• Check the installation at least once a year. An improper mounting could cause the unit to fall off,

resulting in personal injury.

Mounting on a wall

The following accessory (AV-MT220) is separately available if the client wants to mount the both AV-CM70-IP

cameras to a wall or tripod. Contact your Avonic reseller or local distributor for purchasing details.

Double Wall Mount (AV-MT220)

SKU white: AV-MT220-W

SKU black: AV-MT220-B

Visit

www.avonic.com

accessory AV-MT220.

User Manual

| www.avonic.com

to download instructions for mounting the CM70-IP cameras to a wall using the