Billi B-5000 Sparkling Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Billi B-5000 Sparkling. Billi B-5000 Sparkling 16 pagina's. Tap option xl
Ook voor Billi B-5000 Sparkling: Installatiehandleiding (4 pagina's), Installatiehandleiding (7 pagina's)
Pagina afdrukken
User guide
Billi B-5000 – XT, XR.
Options and Operation
To operate, simple press the red (left) button
to dispense boiling water, and blue (right)
button to dispense chilled filtered water .
When the red or blue lights are double
tapped, the water will dispense continually
until interrupted by another light press of
either blue or red buttons .
Operating modes can be selected by the user
by entering option mode . Within the options
mode, you can set the safety switch thorough
the red button (left) and power save mode
through the blue button (right)
To enter the options mode:
1 . Turn on the unit and wait for normal
operation (red and blue buttons are both
illuminated constantly)
2 . Press both the red and blue buttons .
While pressing the two buttons, touch
the red lock icon located in the middle
and towards the back of the lens .
Press and hold both red and blue buttons
and safety switch for three seconds .
3 . Icons will flash yellow .
4 . Release the safety switch and buttons .
5 . Unit is now in options mode .
6 . If you wish to change or activate the power
saving mode, follow the power save mode
settings procedure below .
Safety Switch settings
The
Red
padlock indicates the different
safety settings enabled . To change or activate
a setting once in options mode as above,
press and release the red (left) button to
scroll through the following options;
– Red Icon Off: indicates the hot tap
is disabled .
– Padlock icon on, Red icon on: indicates
safety switch is enabled
– Red Icon On: indicates normal operation
with safety switch not enabled .
6
To save new setting and exit Options Mode,
touch the safety switch and release . Wait 10
seconds for unit to return to normal operation,
with the desired settings .
To dispense boiling water once the safety
switch is activated simply touch the red lock
icon on the top of the lens . You will be able
to dispense boiling water for 8 seconds .
After 8 seconds the safety switch will
automatically reactivate, and the red
padlock icon will appear again .
Power save mode settings
(EcoIntelligence, standby or on 24/7)
Green
The
icons on the tap indicate the
power save level that is selected . To change
or activate a setting once in options mode
press and release the blue (right) button
to scroll through the following options;
– Green Leaf icon: indicates Eco Intelligence
self learning timer is enabled .
– Moon & Star Icon on: indicates Standby
Mode is enabled .
– Blue Icon On, no green icons: indicates
system is in 24 hour continuous mode
To save new setting and exit Options Mode,
press the safety switch and release . Wait 10
seconds for unit to return to normal operation,
with the desired settings .
Holiday mode
To set press the pressure relief valve located
under the unit cover beside the filter housing .