Aqua One moray 2300 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aqua One moray 2300. Aqua One moray 2300 12 pagina's. Aquarium pumps
Ook voor Aqua One moray 2300: Handmatig (12 pagina's)
Pagina afdrukken
Pump Installation
The 360, 480 or 1300 series Morays can be
mounted in 2 different ways and used for a
variety of applications. All 3 models come with
uplift pipe adapters enabling them to be used
as an alternative to air driven systems on under
gravel filters. Refer to the "know your pump"
section at the front of this instruction booklet for
part identification.
Attaching the hang bracket 380/480 series
1. Remove the top motor cover and the strainer.
2. Remove the 4 suction cups.
3. Insert the hang mount into the 2 holes at the
strainer end of the motor
4. Place the top motor cover and the strainer (If
being used) back into position.
Attaching the hang bracket 1300 series
1. Remove the strainer and slide the base plate
out towards the impeller.
2. Slide the hang mount into the groves at the
back of the pump.
3. Replace the strainer. (If being used)
They are also provided with multiple outlet
options.
water level
1. Duckbill or multi directional outlet: allows the
water to be channelled a variety of different
directions. Good for providing water flow to
static areas of the aquarium, thus reducing
waste build up.
water level
2. Venturi: for injecting bubbles into the
aquarium. The venturi adjuster allows the water
to air ratio to be adjusted by the user.
3. A 19mm barbed hose tail is also provided
with the 1300 series pump. This can be used for
running devices such as protein skimmers.
2300, 3600 and 4900 series pumps are
dedicated sump pumps. They are provided with
19mm and 25m barbed hose tails. They can be
used for many other purposes such as running
external filtration devices or simply circulating
water.
2
7