AVOURY 6000448 Gebruikershandleiding - Pagina 17

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AVOURY 6000448. AVOURY 6000448 20 pagina's.

Pagina afdrukken

CLEANING AND MAINTENANCE

TROUBLESHOOTING

PAGE 38

PAG E 16

Carrying out the

Info: The first part of the programme

can begin. This process should be

is finished. In the second part the

repeated until the water tank has

descaling programme

appliance is rinsed with fresh water to

been emptied entirely.

remove the remainder of the descaling

When the "Descaling necessary"

After the rinsing programme has

agent.

LED

been completed, the pod is ejected

is illuminated, this means

18. Remove the water tank and pour out

that the descaling programme must be

and the LED "Water tank empty" will

any remaining liquid.

carried out. The programme lasts for

illuminate.

19. Rinse the water tank with fresh tap

approximately 20 minutes.

14. Fill the water tank with fresh tap

water.

Switch on the tea maker.

water.

20. Put the water filter back into the

water tank if required.

2. Open the pod compartment

The descaling programme is complete.

21. Fill the water tank completely with

remove the sealing lm and insert a

fresh tap water and put it back in the

cleaning pod.

machine. The LED "water tank empty"

The LED "Descaling necessary"

goes off.

begins to ash and the

22. Empty the collecting vessel and

On/O button

illuminates.

remove the capsule drawer.

23. Empty the drip tray if necessary.

3. Press the On/O button to start the

Then reinsert the drip drawer

descaling programme.

and put the collecting vessel back

The LED "Descaling necessary" will

under the outlet.

ash throughout the entire cleaning

24. The LED "empty capsule container"

programme.

goes off and rinsing begins

The LED "Water tank empty"

automatically.

will go out.

Info: Rinsing is carried out in two

cycles. The liquid that has run through

4. Empty the water tank

the machine flows into the collecting

remove the water lter, if necessary.

vessel. When rinsing is finished the

5. Pour 250 ml of Avoury liquid desca-

descaling capsule is ejected.

ling agent and an additional 250 ml

25. The first cycle is finished when the

of tap water into the water tank.

Start-Button

6. Replace the water tank again.

continuously.

The LED "Empty pod basket"

26. Empty the collecting vessel and put

illuminates.

it back under the outlet.

27. Then press the Start-Button

7. Empty the drip tray and the pod

to start the second cycle.

basket

28. When the second cycle is finished

8. Replace both parts again.

the capsule is ejected automatically.

The LED "carry out descaling"

goes off and the

9. Place a container that holds at least

Start-Button

continuously.

300 ml volume under the outlet

The descaling programme is finished.

Descaling takes place in 250 ml

cycles. Once the descaling liquid

has passed through the system, it is

released into the container. Once a

cycle has been completed, the con-

tainer must be emptied and placed

under the outlet again. At this point,

press the On/O button to con rm

that the next cycle can begin. This

process should be repeated until

the water tank has been emptied

entirely.

After the rst part of the descaling

programme has been completed,

the "Water tank empty"

lights up.

10. Remove the water tank and tip away

the remaining liquid.

11. Rinse out the water tank with fresh

tap water.

12. Empty the container and place it

and

back under the outlet.

13. Fill the water tank with 500 ml tap

water and put it back in again.

The tea maker rinses the brewing

unit in 250 ml cycles with clear tap

lights up

water. The tap water that passes

through runs into the container.

Once a cycle has been completed,

the container must be emptied and

placed under the outlet again. At

this point, press the On/O but-

ton to con rm that the next cycle

lights up

LED

PAG E 17