Allied Telesis AT-8000S/24 Gegevensblad

Blader online of download pdf Gegevensblad voor {categorie_naam} Allied Telesis AT-8000S/24. Allied Telesis AT-8000S/24 3 pagina's. Layer 2 stackable fast ethernet switch
Ook voor Allied Telesis AT-8000S/24: Gegevensblad (3 pagina's), Gegevensblad (3 pagina's)

Pagina afdrukken
Allied Telesis AT-8000S/24 Gegevensblad
Datasheet |
Switches
AT -8000S/16
Layer 2 Managed Fast Ethernet Switch
AT -8000S/16
16 port standalone 10/100TX Layer 2 switch
with 1 active SFP bay (unpopulated) and
1 standby 10/100/1000T port (RJ-45)
Overview
The small form factor AT-8000S/16 provides
line-rate Layer 2 switching in an affordable,
fixed-configuration platform. Featuring easy
installation and exceptional reliability, this
10/100 switch comes with one Gigabit uplink
port with the option of the integrated copper
10/100/1000 port or a 100 or 1000 SFP slot
for fiber connectivity.
Ideal Workgroup and
Remote Office Connectivity
Designed for the smaller workgroup or remote
office this highly featured switch mirrors the
advanced feature set of the larger 8000S series
stackable products while offering the benefits of
silent operation and a port density aimed at
right priced functionality.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis' intuitive yet fully featured Web interface
the advanced features of the AT-8000S/16 are
accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Allied Telesis
Secure Management
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMP v3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a
pre-determined part of your network offering
guests such benefits as Internet access while
ensuring the integrity of your private network
data.
Gigabit and Fast Ethernet SFP
Support
All switches in the 8000S family support both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs).This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased in over time.The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Support for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
Key Features
Easy,Well Known Management
•
Industry standard CLI
•
Simple intuitive, full featured Allied Telesis
Web interface
•
Secure encrypted Web and CLI management
with SSH v2 and SSL
•
SNMP
•
Two level access privileges
All the QoS Needed in the Wiring Closet
for Today's Voice and Data Networking
•
Eight priorities assigned to four queues
•
IEEE 802.1p for Layer 2 QoS
•
DSCP (DiffServ) for Layer 3 QoS
•
IEEE 802.1p to DSCP remarking traffic ready for
transport to the Layer 3 core of the network
•
Layer 2 and Layer 3 ACL
Securing the Network at its Most
Vulnerable Point
•
IEEE 802.1x and RADIUS network login: for
advanced control of user authentication and
accountability
•
Guest VLAN: to ensure visitors or unauthorized
users connect only to services defined by IT. E.g.
Internet
•
TACACS+: for ease of management security
administration
•
Layer 2 and Layer 3 ACL
•
Port MAC address security options
Small Form Factor
•
Standalone switch for remote locations
or where stacking is not required
•
Silent operation (fanless)
www.alliedtelesis.com