Allied Telesis AT-8600 Series Hoe configureren - Pagina 7
Blader online of download pdf Hoe configureren voor {categorie_naam} Allied Telesis AT-8600 Series. Allied Telesis AT-8600 Series 9 pagina's. Virtual chassis stacking
Ook voor Allied Telesis AT-8600 Series: Problemen oplossen (5 pagina's), Release Release (6 pagina's), Brochure (12 pagina's), Brochure (8 pagina's)
Pagina afdrukken
Distribution switch 1 configuration
The LAN off this switch uses VLAN 1. This exists by default, so you only need to change
ports 1 and 2 to tagged ports and enable STP. STP is necessary because each distribution
switch forms a loop with the two core switches.
Distribution switch 2 configuration
The LAN off this switch uses VLAN 2, which you need to create.
Distribution switch 3 configuration
The LAN off this switch uses VLAN 3, which you need to create.
Page 7 | AlliedWare™ OS How To Note: VRRP
set system name=distro1
enable stp=default
set stp=default mode=rapid
set vlan=1 port=1-2 frame=tagged
set system name=distro2
create vlan=vlan2 vid=2
add vlan=2 port=3-24
add vlan=2 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
set system name=distro3
create vlan=vlan3 vid=3
add vlan=3 port=3-24
add vlan=3 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
Distribution switch 1 configuration