AVPro Edge AC-CXWP-USBC-T Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} AVPro Edge AC-CXWP-USBC-T. AVPro Edge AC-CXWP-USBC-T 4 pagina's. Wall plate transmitters

Pagina afdrukken

Input Switching:

Each wall plate utilizes auto sensing technology. This means once a source is connected the

wall plate will recognize the connection and automatically send the signal to the display.

For the VGA, MDP & USB-C wall plate: if you already have a source plugged into the wall plate

and you plug in another source the wall plate will automatically switch to the source that

was just put in.

If you have 2 sources plugged into the VGA, MDP & USB-C wall plate you can switch between

the inputs by pressing the square lit up button. A green light indicates that MDP, VGA or USB-C

is being used and an amber colored light indicates that HDMI is selected.

If the active source is unplugged it will automatically switch to the other plugged in source.

EDID Management:

EDID management allows you to manage

the input device (typically the display) to

request specific video resolutions and/

or audio codecs from a source. EDID can

be toggled using the turn dial (Located on

bottom of unit opposite of HDBT port).

Use a flathead screwdriver to toggle be-

tween different preset EDIDs by twisting

the dial to the preferred EDID. The following choices are available:

4K60HZ 420 3D 2Ch [Default]

4K60HZ 420 3D 4CH

4K60HZ 420 3D 8CH

4K60HZ 420 HDR BT2020 3D 2Ch

4K60HZ 420 HDR BT2020 3D 6Ch

4K60HZ 420 HDR BT2020 3D 8Ch

4K30HZ RGB 3D 2CH

4K30HZ 444 3D 6CH

4K30HZ 444 3D 8CH

4K30HZ 444HDR BT2020 3D 2CH

4K30HZ 444HDR BT2020 3D 6CH

4K30HZ 444HDR BT2020 3D 8CH

1080P60 RGB 8 BIT 3D 2CH

1080P60 444 3D 6CH

1080P60 444 3D 8CH

Copy from output