Aqua Quip JET-VAC Installatiehandleiding en gebruikershandleiding - Pagina 9
Blader online of download pdf Installatiehandleiding en gebruikershandleiding voor {categorie_naam} Aqua Quip JET-VAC. Aqua Quip JET-VAC 12 pagina's. Automatic pool cleaner
Ook voor Aqua Quip JET-VAC: Installatiehandleiding en gebruikershandleiding (12 pagina's)
Pagina afdrukken
JET‑VAC REGULAR MAINTENANCE CHECK LIST:
• Check and clean the wall fitting strainer regularly.
• Ensure that the booster pump timeclock is synchronised with the pool pump
timeclock.
• Empty the debris bag regularly.
• Regularly check and lubricate the o-ring on the bayonet wall fitting.
• Remove funnel adaptor gasket and clean all fine debris and sand before
re-connecting Jet-Vac bag.
• Check that the bearings/wheels are free spinning.
• When backwashing, make sure that the Jet-Vac wall fitting is completely
disconnected.
• After backwashing, ensure that the supply line is completely flushed before
re-connecting Jet-Vac.
• Stainless steel wheel should be 19mm (¾") off the ground.
• Check hose swivels and disconnect swivel for leaks and ease of rotation.
• Ensure that there are no holes in wall fitting strainer.
• Roller rings on sweep hose should be free spinning and not worn.
• The sweep hose should be flexible and swishing.
• Check for correct gearbox operation, this ensures that Jet-Vac will reverse properly.
• Make sure that any worn parts on the Jet-Vac are promptly replaced.
• When the Jet-Vac is not in use, ensure that it is not stored in a coiled-up position.
Regular checking and maintenance of your Jet-Vac will help prevent
OTHER JET‑VAC ITEMS AVAILABLE:
FLOW CONTROL TIMER
Protects your Jet-Vac Booster Pump from running dry and lets you program how
long your Jet-Vac should run per day. Just set it and forget.
Simply plug the Booster Pump into the Control Box, and plumb in the supplied Flow
Switch. 240v for Australian and New Zealand Customers.
J E T - V A C A U T O M A T I C P O O L C L E A N E R – I N S T A L L A T I O N & O P E R A T I N G I N S T R U C T I O N S
JET-VAC
premature wear and tear.
JET-VAC HEAD ONLY
If your Jet-Vac is more than 5 years old and requires spare parts,
it may be cost effective to replace the Head Only, and keep using
the original assembled Hose Set. The Head Only includes bag and
funnel adaptor.
For dealers, The Jet-Vac JV109AU Head Only is attractively
packaged for use as a retail display.
JET-VAC HOSE SET COMPLETE
For older Jet-Vacs that may need hoses, swivels and feed hoses
replaced, a better option may be purchase JV209 Jet-Vac Hose
Set Complete. Factory-assembled and includes all hoses, swivels,
mender nuts, hose floats, disconnect swivel and wall fitting.
AUTOMATIC
POOL CLEANER
– PART # DCC240
– PART # JV109AU
– PART # JV209AU
9