DFI VP070-M8M Snelle installatiehandleiding - Pagina 7

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} DFI VP070-M8M. DFI VP070-M8M 14 pagina's. Arm-based in-vehicle fanless touch panel pc

Pagina afdrukken

Please follow the steps below to install the card into the socket.

Step 1:

Please follow the steps below to install the card into the socket.

Insert the card into the socket at an angle while making sure the notch and key are perfectly

aligned.

M.2 Module

Step 2:

Press the end of the card far from the socket down until against the stand-off.

Step 3:

Screw tight the card onto the stand-off with a screw driver and a stand-off screw until the gap

between the card and the stand-off closes up. The card should be lying parallel to the board

when it's correctly mounted.

Quick Installation Guide | VP070-M8M

M.2 Module

Stand-off

Notch

M.2 Module

Notch

Stand-off

Notch

M.2 Socket

Stand-off

Key

M.2 Socket

Key