AVS AVS S4 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AVS AVS S4. AVS AVS S4 17 pagina's. S-series car alarm range
Ook voor AVS AVS S4: Gebruikershandleiding (9 pagina's), Gebruikershandleiding (10 pagina's)

Pagina afdrukken
AVS AVS S4 Gebruikershandleiding

Optional features

Optional features are dependent on the systems already in your vehicle. Not
all features are available on all vehicles. Some features may require additional
parts and/or additional installation charges. Features are subject to change.
Please check with your AVS installer.
CENTRAL LOCkINg FROM THE REMOTE
The alarm will lock/unlock the doors when the alarm is armed/
disarmed.
ON-BOARD TuRBO TIMER
For maximum security the system has an on-board turbo timer for turbo
vehicles that can be set up by your AVS installer.
1. Turn the ignition off and exit the car as normal.
2. Push the button on the remote to arm the alarm as normal.
3. The engine will continue to run for a preset run time of 1, 2 or 4 minutes.
4. If the system detects an intrusion during the preset run time the system will
immobilise the engine and the siren will sound (AVS S5/S4).
5. The engine can be stopped before the set time by pushing the
button on the remote for 3-seconds. This button can be
programmed to instant. Ask your AVS installer.
TuRBO TIMER INTERFACE
The system will allow the vehicle to run on an external turbo timer. It can
be set up by your AVS installer.
1. Turn the ignition off and exit the car as normal.
2. Push the
3. The engine will continue to run for the time set on the external turbo
timer (this must not exceed the preset run time of the system which is
set at 1, 2 or 4 minutes).
4. If the system detects an intrusion during the preset run time the system will
immobilise the engine and the siren will sound (AVS S5/S4).
BOOT RELEASE FROM THE REMOTE
1. Make sure the vehicle ignition is turned off.
2. Press the
3. The boot will unlock (and if the system is armed it will disarm).
button on the remote to arm the alarm as normal.
button on the remote for 3-seconds.