CPG 351GTCPG36NL Conversiehandleiding

Blader online of download pdf Conversiehandleiding voor {categorie_naam} CPG 351GTCPG36NL. CPG 351GTCPG36NL 6 pagina's. Gas countertop griddles
Ook voor CPG 351GTCPG36NL: Gebruikershandleiding (14 pagina's)

Pagina afdrukken

Gas Conversion Guide

Thermostatic

Griddles

Follow the below steps to convert your CPG Thermostatic Griddle from Natural Gas to Liquid Propane.

These units are shipped fully equipped for use with Natural Gas. If you want to convert your unit to LP,

a different orifice is necessary. Orifice(s) for Liquid Propane are provided in a bag tied to the valve on

the front panel of the unit. The following steps will explain how to replace the burner orifice(s), pilot

orifice(s), and how to set the gas regulator to your new gas type.

Safety Precautions

CAUTION:

•

Failure to comply with the following operation instructions could lead to potential hazards and/or

unsafe practice and could result in injury and damage to product and property.

NOTICE:

•

Local codes regarding installation vary greatly from one area to another. The National Fire

Protection Association, Inc., states in its NFPA96 latest edition that Local codes are "Authority

Having Jurisdiction" when it comes to requirement for installation of equipment. Therefore,

installation should comply with all Local codes.

•

This product is intended for commercial use only. Use in residential setting will void the warranty.

WARNING:

•

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any

other equipment.

•

Improper installation, adjustment, alteration, service or maintenance could lead to property

damage, injury or death. Read the installation, operating and maintenance instructions thoroughly

before installing or servicing CPG equipment. This manual must be retained for future reference.

•

A licensed installer must handle all maintenance and repair.

Gas Pressure

•

The appliance and its individual shutoff valve (to be supplied by user) must be disconnected from

the gas supply piping system during any pressure testing of that system at test pressures in excess

of 1/2 PSI (3.45 kPa).

•

The appliance must be isolated from the gas supply piping system by closing its individual manual

shut-off valve during any pressure testing of the gas supply piping system at test pressures equal

to or less than 1/2 PSI (3.45 kPa).

Cooking Performance Group