CPG 351S36SBL60K Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CPG 351S36SBL60K. CPG 351S36SBL60K 17 pagina's. Gas broiler
Ook voor CPG 351S36SBL60K: Gebruikershandleiding (13 pagina's)

Pagina afdrukken
MOUNTING INSTRUCTIONS
36" WIDE RANGE
1.
Secure support bracket (E) to back plate assembly (F)
using screws (G).
2.
Remove rubber feet (H) from the salamander.
3.
Secure brackets (A) on salamander using screws &
washers (B, C & D)
4.
Secure the salamander on the rear support
bracket (E) by the screws (G).
60" WIDE RANGE
1.
Select a side to mount the salamander to the range.
Range Mounting Instructions for the Gas Salamander
It cannot be mounted in the center.
2.
When mounting over a 4 or 6 burner gas range
Follow the same procedure as the 36" range
as listed above.
H
Description
A
Brackets
B
M8 Stainless Steel Screws
Diagram
C
Spring Washers
Description
Quantity
Letter
D
M8 Flat Washers
A
Bracket
B
M8 Stainless Steel Screws
E
Rear Support Brackets
C
Spring Washer
D
M8 Flat Washer
F
Back Plate Assembly
E
Rear Support Bracket
F
Back Plate Assembly
G
G
Screw
H
Rubber Feet
H
Rubber Foot
www.CookingPerformanceGroup.com
1-800-678-5517
USER MANUAL
D
A
C
B
E
Quantity
1. Secure support bracket (E) to back plate assembly
(F) using screws (G).
2
2. Remove rubber feet (H) from the salamander.
8
3. Secure brackets (A) on salamander using screws
8
and washers (B, C, and D).
8
4. Secure the salamander on the rear support (E)
2
bracket by the screws (G).
1
Screws
6
4
WALL MOUNT
1.
Secure top hanger plate (A) on salamander
with spring washers (B) & screws (C).
2.
Secure bottom hanger plate (F) horizontally
on wall with anchor bolts (E).
3.
Secure stand off (D) on salamander with spring
washers (B) & screws (C).
4.
Put top hanger plate (A) on the bottom hanger
Wall Mounting Instructions for the Gas Salamander
plate (F) and tighten.
F
G
2
8
8
Diagram
A
Description
Letter
8
B
A
Top Hanger Plate
B
Spring Washer
C
2
C
M8 Stainless Steel Screws
D
1
D
Bottom Stand Off
E
Anchor Bolt
6
E
F
Bottom Hanger Plate
F
4
A
B
Description
Top Hanger Plates
1. Secure top hanger plate (A) on salamander with
Quantity
spring washers (B) and screws (C).
Spring Washers
2
2. Secure bottom hanger plate (F) horizontally on w
12
M8 Stainless Steel Screws
with anchor bolts (E).
12
3. Secure stand off (D) on salamander with spring
Bottom Stand Offs
2
washers (B) and screws (C).
5
4. Put top hanger plate (A) on the bottom hanger p
Anchor Bolts
1
(F) and tighten.
Bottom Hanger Plate
C
D
E
F
Quantity
2
12
12
2
5
1
7