CPG CK-HPSU212 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CPG CK-HPSU212. CPG CK-HPSU212 11 pagina's. Gas step up hot plate

LOCATION OF DATA PLATE

The data plate is located on the side panel.

IMMEDIATELY INSPECT FOR SHIPPING DAMAGE

Equipment should be examined for damage before and during unloading. The freight carrier has

assumed responsibility for its safe transit and delivery. If equipment is received damaged, either

apparent or concealed, a claim must be made with the delivering carrier.

A) Apparent damage or loss must be noted on the freight bill at the time of delivery. It must then be

signed by the carrier representative (Driver). If this is not done, the carrier may refuse the claim. The

carrier can supply the necessary forms.

B) If concealed damage or loss is not apparent until after equipment is uncrated, a request for

inspection must be made to the carrier within 15 days. The carrier should arrange an inspection. Be

certain to hold all contents and packaging material.

Installation should be performed by a qualified installer who thoroughly read, understands and

follows these instruction.

If you have questions concerning the installation, operation, maintenance or service of this product,

visit Cooking Performance Group's website at www.CookingPerformanceGroup.com.

DANGER：This symbol warns of imminent hazard which will result in serious injury or

death.

WARNING: This symbol refers to a potential hazard or unsafe practice, which could result

in serious injury or death.

CAUTION: This symbol refers to a potential hazard or unsafe practice, which could result

in minor or moderate injury or product or property damage.

NOTICE: This symbol refers to information that needs special attention or must be fully

understood even though not dangerous.

NOTICE: This product is intended for commercial use only. Not for household use.

NOTICE: Local codes regarding installation vary greatly from one area to another. The National

Fire Protection Association, Inc., states in its NFPA96 latest edition that local codes are

"Authority Having Jurisdiction" when it comes to requirement for installation of

equipment. Therefore, installation should comply with all local codes.

SAFETY PRECAUTIONS