CPI CXB2 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} CPI CXB2. CPI CXB2 13 pagina's.

INSTALLATION INSTRUCTIONS

Install the CXB2 onto the note validator mounting studs and through the mounting hole of the

machine. Secure using the appropriate hardware.

Micro USB

Connection

Figure 3

Connect the CXB2 to the supplied interface harness. Install the (16) pin connector into the interface

slot.

See Figure 4.

Caution: Do not force the plug into note validator. This may cause pins to bend or break.

MDB Harness: OPT-HS-CXB-MDB2 Rev.D

CPI 2016

(CONTINUED)

Diagnostic LED

Service Button

Cassette Latch

Hex Nut #8-32

(4 pcs.)

(not included)

Lower Sensors

Module Latch

(2 pcs.)

Figure 4

P/N# 253052002

See Figure 3.

To remove the cassette:

1. Lift the latch.

2. Lift up on the

cassette. Pull back.

CXB2

Mexico

http://www.cranepi.com