Allied Telesis Rapier AR 700 Series Hoe configureren - Pagina 5
Blader online of download pdf Hoe configureren voor {categorie_naam} Allied Telesis Rapier AR 700 Series. Allied Telesis Rapier AR 700 Series 6 pagina's. How to set up pppoe between a linux client and access concentrator
Ook voor Allied Telesis Rapier AR 700 Series: Handleiding voor probleemoplossing (8 pagina's), Problemen oplossen (5 pagina's), Handleiding voor snelle installatie (13 pagina's), How-To (8 pagina's)
Pagina afdrukken
Configurations
Configurations
Central Office Router
set system name=Central_Office
enable l2tp
enable l2tp server=both
add l2tp call="tunnel" rem="tunnel" ip=10.10.10.2 ty=virtual prec=in
create vlan="vlan2" vid=2
add vlan="2" port=3,4
create ppp=0 over=tnl-tunnel
set ppp=0 bap=off username="chap" password="chap"
enable ip
add ip int=eth0 ip=10.10.10.1 mask=255.255.255.0
add ip int=ppp0 ip=192.168.1.1
add ip int=vlan1 ip=222.222.1.1
add ip int=vlan2 ip=222.222.2.1
add ip rou=10.10.10.0 mask=255.255.255.0 int=eth0 next=10.10.10.2
add ip rip int=ppp0 send=rip2 receive=rip2
set ip riptimer update=15 invalid=90 holddown=60 flush=150
set ospf routerid=222.222.1.1 rip=both
add ospf area=backbone stubarea=off summary=send
add ospf range=222.222.1.0 area=backbone mask=255.255.255.0
add ospf range=222.222.2.0 area=backbone mask=255.255.255.0
add ospf interface=vlan1 area=backbone
add ospf interface=vlan2 area=backbone
enable ospf
Page 5 | AlliedWare™ OS How To Note: Dynamic Routing over L2TP