DG FPGA Setup - Pagina 9

Blader online of download pdf Setup voor {categorie_naam} DG FPGA. DG FPGA 14 pagina's.
Ook voor DG FPGA: Setup (5 pagina's), Setup (20 pagina's), Setup (8 pagina's), Setup (10 pagina's), Setup (18 pagina's)

Pagina afdrukken
DG FPGA Setup
dg_nvmeip_raid0x2_fpgasetup_xilinx_en.doc
5) After connecting USB cables to PC, many COM ports are detected.
In case of KCU105/VCU118, select Standard COM port.
In case of ZCU106/ZCU102, select Interface 0 COM port.
On Serial console, the setting is as follows.
Set Buad rate=115,200, Data=8-bit, Non-Parity, and Stop = 1, as shown in Figure 2-6.
15-Jul-21
Figure 2-6 Select COM port and set COM port
Page 9