DG FPGA Setup - Pagina 10

Blader online of download pdf Setup voor {categorie_naam} DG FPGA. DG FPGA 18 pagina's.
Ook voor DG FPGA: Setup (5 pagina's), Setup (14 pagina's), Setup (20 pagina's), Setup (8 pagina's), Setup (10 pagina's)

Pagina afdrukken

dg_toe100gip_fpgasetup_xilinx.doc

4) Another side of MTP/MPO cable, insert QSFP28 transceiver to connect with 100Gb

Ethernet card on PC.

5) Power on FPGA board or PC which connects the FPGA card.

6) For KCU116 and U250 card, open Serial console and download configuration file with

firmware by following step.

i) Open Serial console. When connecting FPGA board to PC, many COM ports from

FPGA connection are detected and displayed on Device Manager.

For KCU116, select Standard COM port, as shown in the left window of Figure 2-7.

For U250, select the 2

On Serial console, use following setting: Buad rate=115,200, Data=8-bit, Non-Parity,

and Stop = 1.

28-Apr-21

USB Serial port, as shown in the right window of Figure 2-7.

Figure 2-7 COM port number for Serial console

Page 10