DG SATA-IP Instructie - Pagina 6

Blader online of download pdf Instructie voor {categorie_naam} DG SATA-IP. DG SATA-IP 10 pagina's.

dg_sata_ip_dev_demo_instruction_at7_en.doc

3 Operation Test on OS

1. Open Device Manager on Windows10 OS. New SATA Device disk (DG SATA Device) is

detected under "Disk drives". If new disk is not auto-detected, open device manager and

then select "Scan for hardware changes" under Disk drives icon to re-start new disk

detection.

Note: If the SATA device is connected as hot-plug (run after Windows OS boot-up

completely), the M/B must be configured to support hot-plug detection on SATA

connection. Otherwise, the user needs to reboot the PC to detect the new disk.

2. Generally, the pop-up menu to initialize disk is displayed. Click "OK" button to confirm new

disk initialization, as shown in the right window of Figure 3-2.

Note: If no pop-up menu is displayed, select Computer Management -> Disk Management.

The new disk which is unallocated is displayed. Select the new disk and select Initialize

Disk menu, as shown in the left window of Figure 3-2.

If new disk which is unallocated is not displayed, please close and re-open Disk

Management.

17-Jun-21

Figure 3-1 New disk detected on WindowsOS

Figure 3-2 Initialize Disk

Page 6