DG DIGCOM32 Montage-instructies - Pagina 3

Blader online of download pdf Montage-instructies voor {categorie_naam} DG DIGCOM32. DG DIGCOM32 5 pagina's.

1. Install the body of the easel and connect the horizonal

and vertical rods with screws.

3. Connect the vertical bar to the train and install the

latch, as pictured.

2. Check the front and back side of the body of the easel

to ensure that it is properly installed. Compare against

the image above.

4. Using screw and bracket C-1, assemble the

supporting bar between the body of the easel and the

supporting leg. (Tilt angle can be adjusted by sliding the

screws.)