DG Flugzeugbau DG-1000S Reparatiehandleiding - Pagina 7

Blader online of download pdf Reparatiehandleiding voor {categorie_naam} DG Flugzeugbau DG-1000S. DG Flugzeugbau DG-1000S 16 pagina's. & motorglider

Tools and facilities required

Tools

- Accurate weighing scales for the correct mixing of resin and hardener

- Containers and wood mixing sticks

- Brushes (short hair) to apply the resin

- Metal roller to press down the glass cloth and to force the air out to reduce

the formation of bubbles

- Scissors to cut the fabric

- Adhesive tape

- Plastic film for a tempering tent

- Hot air blower

- Abrasive paper - various grades

- Knife

- Saw to cut tough plastic

- Rubber hand gloves

- Accurate thermometer up to 60°C (140° F)

Facilities

To insure proper curing, the room temperature during repair work and at

least 12 hours afterwards should be maintained at 21°C (70° F). After that

the repaired parts are to be tempered. Therefore you may construct a

tempering tent, using plastic film or Styrofoam plates.

Issued December 2010

Repair manual DG-1000

3.1