DG Flugzeugbau DG-500M Onderhoudshandleiding - Pagina 11

Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} DG Flugzeugbau DG-500M. DG Flugzeugbau DG-500M 13 pagina's.

Landing gear :

Check to insure if properly aligned? No bent forks? Proper extension and

retraction? Any dirt in the forward fork pivot? Any white areas or cracks in

the wheel box? Remove the baggage area floor panels and inspect the

wheel box from above. Landing gear control circuit condition. Is there free

play between actuating lever and rear upper fork?

Nose wheel and tail wheel

Any cracks or white patches around the attachment?

Check the steerable nose wheel for bent struts, damaged bearings and easy

motion.

Horizontal tailplane-stabilizer:

Outer skins: Crushing, cracks, delaminations?

Mounting: Glued joint of the bushes, white areas around bushes, cracks in

shear webs, cracks around locking plate?

Hinge mounts: checked?

Elevator:

Crushing, cracks, delaminations?

Hinge mounts checked? - Control surface horn bent or loose?

Do all checks of the daily inspection (see flight manual section 4.3).

Issued: September 2011

Manual valid with the up-to-date cover page only

Maintenance Manual DG-500M

TN500/05

2.9