Avsl 178.960UK Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avsl 178.960UK. Avsl 178.960UK 9 pagina's.

Setting up

When powered up, BASS and TREBLE controls (14, 13) should remain pointing vertically

(i.e. 12-o-clock position). Turn up the MASTER VOLUME control (12) part way.

Your PAL8 unit should now be ready to operate.

VHF Wireless Microphone

Extend the VHF antenna (18) at the rear of the unit. Insert 2 x AA batteries into the handheld

microphone by carefully unscrewing the base and connecting the "+" and "-" terminals of the

batteries to the corresponding contacts inside the mic body, taking care to observe the correct

polarity and screw the base back onto the handset. Turn the VHF MIC VOL. control (4) up part

way for checking.

Switch on the wireless microphone and gradually increase the VHF MIC VOL control, testing the

microphone for output through the speaker. Note that the microphone switch has 2 positions -

the centre position is muted and the "fully up" position is "on". If the LED on the transmitter

lights dimly, change the batteries.

Take care not to incur "feedback" (howling or screeching sound through the speaker) by

keeping the microphone a sensible distance from the speaker and pointing away from the

hear

speaker so that it doesn't

the speaker output.

Turning the ECHO control (15) clockwise adds an echo function for singing or special effects.

When not in use, switch the wireless microphone off and remove batteries if not being used for

long periods.

External Connections

In addition to the included VHF microphone, a 6.3mm jack input (16) is provided to connect a

wired microphone which is governed by the MIC VOL control (19).

Another 6.3mm jack input (17) is provided to connect a guitar to the PAL8 which is governed by

the MIC VOL control (20).

A line input is also provided on either 3.5mm jack or 2 x RCA sockets (5) for playback from

wired input devices such as mp3 players, laptops or other line level stereo audio sources. This is

selected through the media player section as described on the next page.

The overall BASS or TREBLE (14, 13) tone character of the PAL8 output can be cut by turning

the relevant control anti-clockwise or boosted by turning clockwise. The best setting will depend

on the usage and environment. It is recommended to experiment to get the best results.

To connect a line output from the PAL8 onto another portable PA unit or active speaker for

extra sound coverage, use the 2 x RCA line output connectors (3) next to the line input.

178.960UK User Manual