CPR Callblocker V.106 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CPR Callblocker V.106. CPR Callblocker V.106 12 pagina's.
Pagina afdrukkenS E T T I N G U P
C P R C A L L B L O C K E R
Step 1
Step 1
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Remove the line cable from your telephone and plug into the LINE 1 port of the Call
Blocker.
Blocker.
Step 2
Step 2
Use the small Black cable provided to connect the TEL 1 port to your telephone
Use the small Black cable provided to connect the TEL 1 port to your telephone
Step 3
Step 3
Insure all cables are connected securely
Insure all cables are connected securely
The Call Blocker is setup correctly when there is a red light displayed on the top of the
The Call Blocker is setup correctly when there is a red light displayed on the top of the
unit when the phone is off the receiver or when on a call. If you are using a cordless
unit when the phone is off the receiver or when on a call. If you are using a cordless
phone press the Call Button for a dial tone.
phone press the Call Button for a dial tone.
If you have no dial tone or no red light when on a call you will need to disconnect the
If you have no dial tone or no red light when on a call you will need to disconnect the
cables then reconnect using the LINE 2 and TEL 2 ports.
cables then reconnect using the LINE 2 and TEL 2 ports.
Disconnect line cable from
your telephone and plug into
02.
the LINE 1 port of the
Call Blocker
2