Allied Telesis Rapier AR 800 Series Release Release - Pagina 2

Blader online of download pdf Release Release voor {categorie_naam} Allied Telesis Rapier AR 800 Series. Allied Telesis Rapier AR 800 Series 2 pagina's. Patch 86251-01 release note

Pagina afdrukken

Allied Telesis Rapier AR 800 Series Release Release

Features in 86251-01

Patch 86251-01 includes the following enhancements:

PCR: 02331

Module: IPG, ETH

IP is now informed when an Ethernet interface goes up or down, after a 2.5

second delay.

PCR: 02525

Module: TELNET, PING, IPV6,

TCP

The ADD IPV6 HOST command was not accepting the INTERFACE

parameter when adding a host with a link-local address. This issue has been

resolved.

PCR: 02527

Module: TCP

TCP did not send a TCP Reset message under some circumstances, for

example when the Telnet server was disabled. This issue has been resolved.

PCR: 02552

Module: SWI

If ingress filtering was supported within trunk groups, ports with ingress

filtering enabled were erroneously added to the trunk group. This issue has

been resolved.

PCR: 02574

Module: DVMRP

Some change actions, and the resending of prune messages were not

operating correctly. This issue has been resolved.

PCR: 02581

Module: TM

The test facility was not testing switch ports. This issue has been resolved.

Availability

Patches can be downloaded from the Software Updates area of the Allied

Telesyn web site at www.alliedtelesyn.co.nz/support/updates/patches.html. A

licence or password is not required to use a patch.

Patch Release Note

Network affecting: No

Patch 86251-01 for Software Release 2.5.1

C613-10356-00 REV A