Allied Telesis Rapier Series How-To

Blader online of download pdf How-To voor {categorie_naam} Allied Telesis Rapier Series. Allied Telesis Rapier Series 8 pagina's. How to set up pppoe between a linux client and access concentrator
Ook voor Allied Telesis Rapier Series: Handleiding voor probleemoplossing (8 pagina's), Problemen oplossen (5 pagina's), Release Release (8 pagina's), Hoe configureren (9 pagina's)

Pagina afdrukken

How To |

Set Up PPPoE Between a Linux Client and an Allied Telesis

Access Concentrator

Introduction

This document describes how to set up PPPoE between a Linux client and an Allied Telesis

device.

What information you will find in this document

This document is divided into the following sections:

•

Configuring your Allied Telesis Device‚ page 2

•

Configuring Your Linux Device‚ page 3

•

Starting the Link‚ page 4

•

Debugging and Verifying‚ page 5

•

Other Hints‚ page 6

Which products and software versions does this information apply to?

•

Products:

Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches

AR400 and AR700 series routers

•

Software versions: 2.7.1 and later

C613-16074-00 REV B