CPT CPDP-104 Montagehandleiding - Pagina 6

Blader online of download pdf Montagehandleiding voor {categorie_naam} CPT CPDP-104. CPT CPDP-104 10 pagina's. Circle guide for drill press

Insert short Alignment Pin into the

Left Alignment Plate at the "For Black

Scale" position. Slide the Slide Plate

to the 5 inch mark of the Left

Alignment Plate. Seat the Alignment

Pin into the Slide Plate. Secure Slide

Plate into place by tightening the Lock

Down bolt.

Insert Centering Bit into the Drill Press

Chuck. Position Centering Tool over

Center Pin. Move Table Mount so the

Centering Bit will lower into the bit hole

of the Centering Tool. Tighten the two

exposed 1/4 inch bolts. Release

Alignment Pin, loosen Lock Down Bolt,

move the Slide Plate back and then

tighten the final two bolts. Remove

Centering Tool The tool is now ready for

radial distance drilling only.

Step 9 - Attaching Rotation Plate (for use with Degree Gears)

Lower the Rotation Plate over the

Center Pin thru the hole in the upper

degree gear pocket. Press Rotation

Plate feet into holes of Slide Plate.

Insert Long Alignment Pin into the

designated slot in the Rotation Plate.

Step 7 - Inserting Alignment Pin and securing Slide Plate

Step 8 - Centering Circle Guide to Drill Press Bit