Avtech DG206 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avtech DG206. Avtech DG206 6 pagina's. Hd cctv total solution, ir

Pagina afdrukken

EXPOSURE

LENS TYPE

SHUTTER

AGC

EXPOSURE VALUE

WHITE

MODE

BALANCE

DAY & NIGHT

MODE

IMAGE

BRIGHTNESS

CONTRAST

COLOR GAIN

SHARPNESS

MIRROR

LANGUAGE

FUNC. SET

MOTION DETECTON

PRIVACY

SYSTEM SETUP

RESET

SAVE & EXIT

FIX

AUTO / 1/25 / 1/30 / 1/50

/ 1/60 / 1/100 / 1/ 120 /

1/250 / 1/500 / 1/1000 /

1/3000 / 1/10000

OFF / LOW / MIDDLE /

HIGH

1 ~ 17

AUTO / INDOOR /

OUTDOOR / USER

EXT / COLOR / B/W

1 ~ 256

OFF / LOW / MIDDLE

HIGH

NONE / H / V / HV

ENGLISH / 中文(簡)

SCREEN ALARM

PAD OUTPUT

SECTION

SENSITIVITY

MASKING

COLOR

HEIGHT / WIDTH / LEFT

/ RIGHT / TOP / BOTTOM

OSD COLOR

OSD BG

FACTORY MODE

SAVE & EXIT

DESCRIPTION

No function.

Set the shutter speed for exposure.

Set the level of Auto Gain Control to automatically

adjust the image when the light level changes.

Set the value for exposure.

Set the white balance mode among AUTO,

INDOOR, OUTDOOR and USER.

Set the day & night mode among EXT, COLOR

and B/W..

Set the level of brightness to adjust the brightness

of the image.

Set the level of contrast.

Set the level of gain.

Set the level of sharpness to enhance the clarity of

image detail by adjusting the aperture and

sharpening the edges.

Set the noise reduction mode to LOW / MIDDLE /

HIGH to suppress the noise based on the current

environment, or select OFF to disable this function.

Rotate the images horizontally (H) or vertically (V),

or horizontally & vertically (HV) simultaneously

based on your installation situation when

necessary.

Select the language of the menu: English /

Simplified Chinese.

Select ON to enable motion detection or OFF to

disable this function.

No function.

Select the area for motion detection.

Select the sensitivity for motion detection from

LOW, MIDDLE and HIGH.

Select ON / OFF to enable / disable this function.

Select a color to show area masking.

Set the area to mask.

Select the color for this OSD display.

Select the background color for this OSD display.

Enable to restore the camera parameters to factory

default values.

Select YES to save and exit, or select NO to exit

without saving.