Dell 5530 Mono Laser Servicehandleiding - Pagina 38
Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell 5530 Mono Laser. Dell 5530 Mono Laser 46 pagina's. Loading paper and specialty media
Ook voor Dell 5530 Mono Laser: Snelle referentiehandleiding (2 pagina's), Handleiding voor instellingen en specificaties (29 pagina's), Instellingen en specificaties (29 pagina's)
Pagina afdrukken
Installing the antenna cover
1
Replace the antenna cover on the display assembly.
2
Turn the display hinges to the normal position.
3
Install the:
a
Display assembly
b
WLAN card
c
Battery
d
Base cover
4
Follow the procedures in
System board
Removing the System Board
1
Follow the procedures in
2
Remove the:
a
base cover
b
battery
c
fans
d
heatsink assembly
e
WLAN
f
hard drive (optional)
g
keyboard
h
SSD
i
memory modules
NOTE:
Your computer's Service Tag is located under the system badge flap. You must enter the Service Tag in the BIOS
after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can re-
connect them correctly after you replace the system board.
3
To remove the system board:
a
Lift the latch and disconnect the touchpad cable [1].
b Lift the latch and disconnect the keyboard controller board cable [2].
c
Disconnect the power connector port cable from the system board [3].
d Disconnect the speaker cable from the connector from the system board [4].
e
Peel the adhesive tape and lift the latch to remove the fingerprint cable [5]
f
Lift the plastic lever and disconnect the display touchscreen cable [6]
g Peel the adhesive tape to release the touch screen cable.
38
Disassembly and reassembly
After Working Inside Your
Computer.
Before Working Inside Your
Computer.