Avtech IC-AVH1109 Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Avtech IC-AVH1109. Avtech IC-AVH1109 18 pagina's. H.265 5mp nvr

Camera IP Configurations by LAN

The auto mode is used to simplify the complicated network settings within three minutes. The connection mode of

the LAN port is AUTO by default. This mode is suitable when the LAN port of the device is connected to a hub /

switch.

Note: SETTING Path: MENU  NETWORK  LAN  MODE.

Note: For access this recorder remotely with your mobile device or laptop, you need to connect this

recorder to Internet. For details, please get the setup manual from the supplied CD or from

www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.

The device will automatically configure the IP address of a camera connected by LAN if:

 The connected IP camera is our brand's IP camera.

 The IP configuration method of the camera is DHCP.

 The camera is powered on before the device is powered on.

If the device doesn't configure the IP address of your camera automatically as described above, your IP camera

might NOT be:

 Our brand's IP camera.

 Set to DHCP as its default IP configuration method.

To solve this, reconfigure the IP address of the camera to 10.1.1.xx (xx ranges from 11 ~ 253), which is in the

same network segment as the device.

 For other brand's IP camera, please check its user manual to know how to change the IP address

manually.

 For our brand's IP camera, please check the instructions below:

a) Go to MENU  CAMERA  CONNECTION, and select IP SEARCH at the bottom right corner.

You'll see the list of every connected IP camera with its connection status to this device and MAC

address.

ASSIGN

EDIT

DEVICE TYPE



IPCAM

10.2.1.33

IP SEARCH

NETMASK

GATEWAY

255.255.255.0

10.2.1.10

PRIMARY DNS

PORT

8.8.8.8

00:0E:53:31:06:E5

REFRESH

MAC

VENDOR

AVTECH

ADD