Dell Inspiron 600m Servicehandleiding - Pagina 31

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Inspiron 600m. Dell Inspiron 600m 41 pagina's. Hard drive
Ook voor Dell Inspiron 600m: Start Here (2 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Aan de slag handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Installatiehandleiding (2 pagina's), Aan de slag (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Gebruikershandleiding Mediabasis (26 pagina's), Servicehandleiding (40 pagina's), Servicehandleiding (41 pagina's), Installeren en configureren (38 pagina's), Snel aan de slag (2 pagina's), Snel aan de slag (2 pagina's), Snel aan de slag (2 pagina's), Uw computer instellen (2 pagina's), Servicehandleiding (41 pagina's), Servicehandleiding (4 pagina's)

Pagina afdrukken

1. Hard Drive

Back to Contents Page

System Board

Dell™ Inspiron™ 600m Service Manual

Removing the System Board

CAUTION:

Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit

for the system board includes a CD that provides a utility for transferring the Service Tag sequence to the replacement system board.

NOTICE:

Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

1. Follow the instructions in

"Preparing to Work Inside the

2. Remove the keyboard.

3. Remove the

display

assembly.

4. Remove the

palm

rest.

5. Remove the

microprocessor thermal-cooling

6. Remove the microprocessor.

7. Remove the

reserve battery

8. Remove the one M2.5 x 8-mm screw and one M2.5 x 4-mm screw labeled "circle B."

M2.5 x 4-mm screw

M2.5 x 8-mm screw

system board

Computer."

assembly.

cover.