Dell Inspiron 600m Servicehandleiding - Pagina 22

Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Inspiron 600m. Dell Inspiron 600m 40 pagina's. Hard drive
Ook voor Dell Inspiron 600m: Start Here (2 pagina's), Start Here (2 pagina's), Start Here (2 pagina's), Aan de slag handleiding (2 pagina's), Gebruikershandleiding (34 pagina's), Installatiehandleiding (2 pagina's), Aan de slag (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Installatiehandleiding (2 pagina's), Servicehandleiding (41 pagina's), Gebruikershandleiding Mediabasis (26 pagina's), Servicehandleiding (41 pagina's), Installeren en configureren (38 pagina's), Snel aan de slag (2 pagina's), Snel aan de slag (2 pagina's), Snel aan de slag (2 pagina's), Uw computer instellen (2 pagina's), Servicehandleiding (41 pagina's), Servicehandleiding (4 pagina's)

Back to Contents Page

Palm Rest

Dell™ Inspiron™ 700m Service Manual

Removing the Palm Rest

Replacing the Palm Rest

Removing the Palm Rest

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE:

Disconnect the computer and any attached devices from electrical outlets.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE:

Read

"Before Working Inside Your

1. Remove the battery.

2. Remove the keyboard.

3. Disconnect the black and white antenna cables from the Mini PCI Card.

4. Remove the

display

module.

5. Turn the computer over, loosen the two captive screws, and remove the upper memory module cover.

6. Remove the eight M2.5 x 6-mm screws from the bottom of the computer and the one M2 x 3-mm screw from the optical bay.

7. Turn the computer over, and with the bottom of the case resting on a flat surface, carefully separate the palm rest from the lower case.

a. Disconnect the touch pad cable from the system board.

b. Remove the two M2 x 5-mm screws from the palm rest.

c. Carefully detach the palm rest from the bottom case.

Computer" before performing the following procedure.