Dell Inspiron N5110 Servicehandleiding - Pagina 22
Blader online of download pdf Servicehandleiding voor {categorie_naam} Dell Inspiron N5110. Dell Inspiron N5110 47 pagina's.
Pagina afdrukkenBack to Contents Page
Thermal-Cooling Assembly
Dell™ Inspiron™ N5110 Service Manual
Removing the Thermal-Cooling Assembly
Replacing the Thermal-Cooling Assembly
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Thermal-Cooling Assembly
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Follow the instructions from
4. Gently peel the tape that secures the fan cable to the system board.
5. Disconnect the fan cable from the connector on the system board.
6. In sequential order (indicated on the thermal-cooling assembly), loosen the five captive screws that secure the thermal-cooling assembly to the system
board.
7. Lift the thermal-cooling assembly off the system board.
1
captive screws (5)
3
thermal-cooling assembly
Replacing the Thermal-Cooling Assembly
1. Follow the instructions in
Before You
2. Align the screw holes on the thermal-cooling assembly with the screw holes on the system board.
3. Tighten the five screws that secure the thermal-cooling assembly to the system board.
Begin.
Battery).
step 2
to
step 12
in
Removing the System
2
system board
4
fan cable
Begin.
Removing the
Board.
Battery) before working inside the