Avtech RMA-DAP-SEN Installatie Opmerking - Pagina 5
Blader online of download pdf Installatie Opmerking voor {categorie_naam} Avtech RMA-DAP-SEN. Avtech RMA-DAP-SEN 5 pagina's. Digital active power sensor
Pagina afdrukken
Configure Your Digital Active Power Sensor
4. In Sensor X Label, you may leave the default, "Ext Sensor X," or enter something more
descriptive. Room Alert "E" models accept up to 15 characters, including only letters,
numbers, spaces, hyphens (-), underscores (_) or periods (.). Room Alert "S" models
accept up to 30 characters, including the above and special characters, like ampersand
(&).
5. Alarm On automatically populates with the default temperature scale and Power.
Please refer to your Room Alert User's Guide & Reference Manual to change the default
temperature scale.
6. In Temperature High and Low, you may enter values for high and low thresholds. Your
Room Alert generates alerts based on those thresholds.
•
Room Alert "E" models: the default High & Low is 0—which means no alarm is
configured.
•
Room Alert "S" models: the High & Low fields are disabled by default. You may
enable each field individually by selecting its check box.
7. In Temperature Adjust, you may leave the default, 0, or enter a value to adjust the
temperature reading if it differs from a known value at that location. On Room Alert "S"
models, you must enable the Adjust field by selecting its check box before entering a
value.
8. In Power, select what you want to alarm on:
Detected
power status.)
9. In Use Alarm Profile, which controls light towers and relays on your Room Alert, you
may leave the default,
Save Settings
10. Select
automatically reboot and commit your changes.
AVTECH Software, Inc.
. (You may also select
Profile 1
at the top or bottom of the page. Your Room Alert will
No Power Detected
Alert Disabled
if you do not want an alert on
, or choose another profile from the drop-down menu.
Page 5
Power
or
AVT-200803-1.1.1
AVTECH.com